Pico X Health Technology Group
Household Aircon Care
Wellness aircon servicing for Singapore homes. High-pressure steam reaches the damp surfaces inside the indoor unit, the evaporator fins, blower wheel, drip pan and drain line, and lifts out dust, mould residue and biofilm without leaving cleaning chemicals behind. Delivered by Aira Home Wellness at S$90 per indoor unit.
Book on airahomewellness.com → Ask Aira on WhatsApp
Reaches beyond the filter
A clean-looking filter can sit in front of a damp coil. The care goes deeper, into the accessible internal zones that hold moisture and push air back into the room.
No added chemicals
Steam and a controlled water rinse do the work. No detergent, acid, alkali, fragrance or coating is left inside the unit you breathe through every night.
Timed by the room, not the calendar
Aira Sense watches humidity and cooling behaviour so the visit happens when a unit actually needs it, not on a fixed quarterly contract.
Inside the Airflow Path
Where mould takes hold
An air conditioner moves room air across cold, wet surfaces all day. Over time dust, moisture and biological residue settle there and travel back into the room with everyday airflow.
Evaporator fins
Cold, tightly spaced fins hold moisture while the unit cools and collect fine airborne particles over time.
Blower wheel
The wheel sits behind the filter and throws air back into the room, so its condition shapes the air you breathe.
Drip pan and drain line
Condensation collects here. Sludge or a slow drain keeps the inside of the unit damp between cooling cycles.
The PureSteam Equipment
Industrial dry steam, no chemicals
PureSteam aircon servicing uses the industrial Kärcher SGV 8/5 steam vacuum cleaner. At 8 bar of high-power dry steam and a boiler temperature of up to 173 °C, it kills pathogens and mould on the coil, blower wheel and drip pan, and vacuums the loosened residue away in the same pass. No chemical cleaner is used, so nothing is left behind to corrode the coil or trigger respiratory health issues in the room you breathe in.


Why Dry Steam
Four reasons dry steam is the standard
High pressure, high temperature dry steam is the industry standard for hygiene cleaning wherever chemical residue is not welcome: hospitals, hotels, kitchens and food plants. PureSteam brings the same method to the indoor unit above your bed.
Dry steam, less wet
Dry steam carries far less water than a jet wash or chemical flush, and the Kärcher SGV 8/5 vacuums loosened residue away in the same pass. There is no flood of water across the coil, the electronics or your wall, and the unit dries quickly, so no standing moisture is left to feed new mould.
Safer for your family and the unit
Nothing but steam and water goes into the unit you breathe through every night: no detergent, acid, alkali or fragrance, and no fumes in the room. Without corrosive cleaners on the aluminium fins, the coil keeps its integrity and the unit lasts longer.
High pressure, high temperature
8 bar of steam pressure reaches deep between tightly packed coil fins and into blower wheel crevices that wiping cannot. With a boiler temperature of up to 173 °C, heat kills mould and bacteria on contact. In an independent laboratory test, the SGV 8/5 reduced test bacteria on hard surfaces by more than 99.999%.
The industry standard for hygiene
Kärcher builds the SGV 8/5 for continuous commercial and industrial cleaning, and states that it removes even stubborn dirt without cleaning agents. It is the same class of equipment trusted in professional hygiene settings, not a handheld home steamer.
Dry Steam vs Chemical Wash
PureSteam versus a chemical wash
A chemical wash is the usual answer to a dirty aircon in Singapore. It dissolves grime with acidic or alkaline coil cleaners, then flushes everything out with plenty of water. Here is how the two methods compare inside a home.
| PureSteam dry steam | Conventional chemical wash | |
|---|---|---|
| What does the cleaning | Dry steam at 8 bar and up to 173 °C, vacuumed away in the same pass | Acidic or alkaline coil cleaner, then a water flush |
| Chemicals inside the unit | None | Coil cleaner sprayed onto the fins and tray |
| Water used | Low: dry steam plus a short, captured rinse | High: the coil and tray are flushed through |
| How mould and bacteria are killed | Heat, on contact | Depends on the product and contact time |
| Residue left behind | None | Possible if the rinse is incomplete |
| Effect on the coil | No corrosive agents on the aluminium fins | Repeated harsh cleaners can corrode the fins |
| Air in the room afterwards | No fumes or fragrance | Chemical odour possible |
A chemical wash still has its place. A badly neglected, blocked or corroded unit may need one, or a full overhaul, from a repair specialist. If your unit is beyond steam care, you are told before work starts.
Service Protocol
The PureSteam method
Prepare the airflow path
The indoor unit is opened so steam can reach the filters, fan housing, front panel, drip pan and condensate tray.
- No detergent or fragrance
- Runoff captured
Loosen and remove
Industrial Kärcher SGV 8/5 dry steam (8 bar) releases accumulated dust, mould residue and biofilm from the evaporator fins and blower wheel, where routine filter washing cannot reach.
- Evaporator fins
- Blower wheel
Rinse, flush and verify
A controlled water rinse carries the residue away, the drain line is vacuumed and flushed, and accessible internal surfaces get a final check.
- Drain line flushed
- No coating left behind
Service Packages
Clear, flat pricing
One flat price per indoor unit, with no trip, transport or call-out charge and no minimum number of units.
Household Aircon Care — 1 unit
$90 per indoor unit
About 60 to 90 minutes per indoor unit.
Three indoor units
$270 for 3 units
Same care for every unit, no trip charge.
Four indoor units
$360 for 4 units
Same care for every unit, no trip charge.
Every Visit Includes
- Steam treatment of filters, fan housing, front panel, drip pan and condensate tray
- Steam treatment of evaporator fins and blower wheel
- Controlled water rinse with captured runoff
- Drain line vacuum and water flush
- Humidity guidance for the room
- Final check on accessible internal surfaces
Refrigerant top-ups, compressor or PCB faults, electrical diagnosis and cosmetic repairs are outside this care service and need a licensed aircon or electrical specialist. If a unit is beyond hygiene care, you are told before work starts.
When to Book
A practical care rhythm
Most Singapore homes benefit from steam care every three to six months, depending on how long each unit runs. These are guides, not guarantees: humidity, drainage and usage decide the real interval.
Living room used most of the day
Long daily runtime means the coil and drip pan stay wet for longer.
Main bedroom used nightly
The unit you sleep next to deserves the shortest gap between visits.
Guest room used occasionally
Lower runtime, slower build-up, but still damp between uses.
A unit with a musty smell
A recurring odour on start-up points to the internal moisture zones, not the filter.
R&D Partnership
- BizSafe Level 3Workplace safety certified
- NEA ListedEnvironmental health service
- Chemical-Free MethodSteam and water only
Common Questions
Frequently asked
How much does aircon servicing cost in Singapore?
Household Aircon Care is S$90 per indoor unit, with no trip or call-out charge. Three units are S$270 and four units are S$360. Each unit takes about 60 to 90 minutes.
How often should I service my aircon in Singapore?
In Singapore's humid climate, a bedroom unit used nightly is best cared for every 3 to 4 months, a living room unit every 3 months and an occasionally used unit every 6 months. A musty smell, dripping water or weaker airflow are signs to book sooner.
Is this a chemical wash?
No. The method uses high-pressure steam and a controlled water rinse, without acidic or alkaline cleaners, fragrance or coatings. A badly neglected or blocked unit may still need a chemical wash or overhaul from a repair specialist, and you will be told before work starts.
Is dry steam better than a chemical wash for aircon?
For regular hygiene care in a home, yes. Dry steam at 8 bar and up to 173 °C kills mould and bacteria by heat, uses far less water and leaves no chemical residue, fumes or corrosive agents on the coil. A chemical wash relies on acidic or alkaline cleaners and a heavy water flush. It remains the right call for a badly neglected or blocked unit, and you will be told if yours needs it.
Why is dry steam safer than a chemical wash?
Nothing but steam and water is used, so there are no cleaner fumes in the room and no residue blowing out of the unit when it restarts, which matters for children, older family members, pets and anyone with asthma or allergies. The coil is also spared the acids and alkalis that can corrode aluminium fins over repeated washes.
Will steam soak my room or damage the aircon?
No. Dry steam carries far less water than a jet wash or chemical flush, and the Kärcher SGV 8/5 vacuums loosened residue away in the same pass. Rinse runoff is captured, and the unit dries quickly.
What machine do you use?
PureSteam uses the industrial Kärcher SGV 8/5 steam vacuum cleaner: up to 8 bar steam pressure, a boiler temperature of up to 173 °C and 3000 W heating output, with built-in vacuuming. It is built for continuous commercial and industrial cleaning, not a handheld home steamer.
How is this different from a general aircon service?
A general service usually covers the front panel, filters and a quick drainage check. Household Aircon Care goes further, into the evaporator fins, blower wheel, drip pan and drain line, which is where moisture and mould residue build up.
Will it stop mould from coming back?
It removes accessible residue but leaves no coating, so it cannot guarantee mould will not return. Long-term results depend on humidity, condensation, drainage and a sensible care interval. If mould is also on the ceiling or wall near the unit, treat the room at the same time with Mould Removal & Protection.
Is it safe for homes with children and pets?
Nothing is left behind: no detergent, fragrance or coating. Children and pets should stay out of the work area while the unit is open, and the room can be used again once the service is complete and dry.
Do you do gas top-ups or repairs?
No. Refrigerant work, compressor or PCB faults, electrical diagnosis and cosmetic repairs need a licensed aircon or electrical specialist. The outdoor compressor is not opened as part of this hygiene service.



